Nitrile gloves are often used in production and life, common application areas are the medical industry, mechanical maintenance, and manufacturing industry, beauty salon industry, and household cleaning, so what are the machines to make nitrile gloves?
Each part of the nitrile hand glove manufacturing machine plays an important role in the glove production line. The workers of the nitrile glove factory need to maintain the key parts of the Nitrile hand glove manufacturing machine regularly to reduce the machine failure rate and ensure the normal operation of the glove production line.
Nitrile Glove Manufacturing Equipment
1. Latex tank. The glove dipping machine‘s scientific and reasonable design helps to reduce raw material waste and costs for nitrile glove manufacturers. The cleaned glove is dipped into the glove dipping machine to form a glove prototype.
2. Coagulant tank. Before dipping the Glove former, it is necessary to enter the coagulant tank first, to facilitate the adhesion of the latex on the glove former.
3. Glove dipping machine. Nitrile latex is added to a series of chemicals to form the raw material for making gloves.
4. Leach tank. Remove excess latex and impurities after gloves are impregnated with raw material.
5. Oven. The oven of the nitrile glove production line uses the principle of internal circulation heating, which improves the utilization of resources, thereby reducing costs for nitrile glove manufacturers.
6. Vulcanization furnace. This process is designed to enhance the performance of nitrile gloves. It vulcanizes gloves by heating them.
7. Beading. After the Glove is preliminarily formed, the Glove beading machine should be used to roll the cuff, which can make the cuff neat and easy to wear.
8. Glove stripping machine. Automatically remove the glove from the glove former. There is no manual participation and the error rate is less than 2%, which completely replaces the manual stripping and improves the production efficiency of the nitrile glove manufacturer.
9. Check the equipment. The most commonly used machine to test glove pinhole size is the glove watertight testing machine, which can sample the pinhole size of a batch of gloves to determine whether it meets customer requirements.
10. Packaging machine. Fengwang’s automatic glove packing machine can put 100 finished gloves into the box and seal them according to parameter Settings. At present, there are 3-4 kinds of sealing forms for customers to choose. After the finished gloves are made, they go into the packaging machine to pack the gloves and wait for loading and transportation.
Nitrile Glove Production Line Control System
Sensors and inspection equipment: Monitor and adjust production parameters to ensure that nitrile glove production quality meets requirements.
PLC control system: it can automatically control the production line.
Nitrile Gloves Production Line Auxiliary Equipment
1. Air compressor: Provide compressed air for the production line.
2. Water treatment system: Through the water treatment system to treat production wastewater, so that discharge standards.
3. Waste gas treatment system: treatment of waste gas in production.
Nitrile Glove Production Line Note:
1. Quality compliance: real-time monitoring of the parameters in the production line, so that each standard meets the requirements, to produce products that meet the quality requirements.
2. Equipment maintenance: Regular maintenance of nitrile gloves manufacturing machine, if the machine is not maintained, long-term wear and tear will cause greater cost waste.
3. Environmental protection requirements: Ensure that the waste gas and wastewater discharged comply with the relevant contents of environmental protection regulations.