The glove hand former cleaning system is an important process in the nitrile glove production line, The glove hand former must be cleaned before impregnating the original nitrile solution, leaving no chemical stains, otherwise, it will affect the glove forming quality. Fengwang has 20 years of experience in the production and sale of glove former cleaning systems, strictly controls the cleaning quality of hand models, and puts forward professional solutions for glove manufacturers.
The Main Function of Hand Model Washing Machine
Hand model washing machine is an intelligent cleaning system specially developed to clean the pollutants or chemicals on hand models. The theme of this equipment is made of stainless steel and corrosion-resistant. And equipped with multiple groups of spray systems, automatic control, and synchronous operation with the glove production line. Also cleverly designed water-saving process can be recycled cleaning hand model, to achieve the purpose of environmental protection and energy saving.
Hand Glove Former Washing Machine Workflow
1. Initial rinse to remove most of the nitrile latex residue from the glove former.
2. Use chemical cleaning agents for deep cleaning.
3. Rinse the hand mold after cleaning to remove residue of cleaning agent.
4. Clean the palms and fingers of the gloves with a horizontal brush, then clean the wrists and above with a circular brush.
The Function of the Brush
The main function of the brush is to remove the residual adhesive material, coagulant, dust, and other pollutants on the surface of the hand mold so that the hand mold will have no impurities or pollutants or other chemicals in the subsequent impregnation process.
1. Ensure that all parts of the hand model (especially complex structures such as fingers and palms) are clean and consistent.
2. Remove chemical residues or impurities from the surface of the hand mold by rubbing it against the bristles.
3. Prevent the residue on the hand mold from affecting the quality of the next glove molding.
Glove Hand Former Cleaning System VIDEO
Type and Characteristics of Brush
1. PVA (polyvinyl alcohol) sponge brush: this brush is characterized by soft, strong water absorption, suitable for fine cleaning and polishing of hand molds.
2. Nylon brush is suitable for conventional cleaning, low cost, and has the characteristics of wear resistance, acid and alkali resistance, good elasticity.
3. A stainless steel wire brush, because of its high hardness, strong detergency characteristics, is used for stubborn glue stains or deep cleaning.
4. Mix material brush (nylon + abrasive). Because it has both cleaning and polishing functions, it is suitable for production lines with high-quality requirements for gloves, such as surgical gloves, clean room gloves, etc.
Fengwang Suggests How to Choose a Brush
1. From the hardness point of view, choose a stainless steel wire brush for cleaning stubborn stains, but it is easy to damage the surface of the hand mold. Choose a softer nylon or PVA brush suitable for daily cleaning, thus replacing the protective hand mold.
2. Choose a brush that is resistant to detergent corrosion.
3. Because the long-term cleaning of the brush will affect the cleaning effect, it needs to be replaced regularly. Nylon brush: about 1-3 months (depending on the frequency of use). Stainless steel wire brush: longer life, but pay attention to the problem of rust.
4. The size (length, diameter) of the brush should match the shape of the hand mold to ensure that the cleaning part of the brush is accurate.
5. In order to prevent deformation or corrosion of the brush for a long time, it should be stored in a high-temperature or humid environment.
Frequently Asked Questions and Answers
1. Uneven cleaning of hand molds. The brush installation position is faulty or has incomplete coverage. Reposition the brush or add an auxiliary brush.
2. Hand model cleaning is not thorough. This condition may be caused by abrasion or insufficient hardness of the brush, try to replace with a higher hardness or denser brush.
3. The hand model was scratched during cleaning. This may be because the brush is too hard or the wire is exposed; try switching to a soft brush or checking that the brush wire is not exposed.
4. The brush is easy to be damaged during hand mold cleaning. This is because the brush has been subjected to chemical corrosion or mechanical wear. Regularly replace the brush or choose corrosion-resistant materials, adjust the cleaning parameters.