Glove production line automatic refueling machine is fengwang designed for gloves manufacturers use in PVC/nitrile latex/household gloves production line The Intelligent refueling machine. Its main function is lubrication to ensure the normal operation of the glove manufacturing machine.
Features of Automatic Refueling Machines
The appearance is simple and beautiful, and the space occupied is small.
The area of refueling is small, reducing waste.
Automatic refueling process does not delay the running speed of the production line, avoiding downtime maintenance waste time cost.
Regular maintenance of the hand glove making machine can reduce equipment wear and extend its service life.
Structure of Intelligent Refueling Machine
The Automatic oiler comprises five parts: control system, oil storage tank, pumping system, sensor, and distributor.
Sensors: Monitor the machine’s operating status to ensure automatic refueling and lubrication when needed.
Oil storage tank: Used to store lubricating oil or grease.
Pumping system: The delivery of lubricating oil or grease to the parts that need lubrication.
Dispenser: Distributes lubricating oil or grease to areas where lubrication is required.
Control system: The frequency and amount of refueling can be controlled through the control system.
Application
Latex/nitrile /PVC glove production line: used for lubricating bearings, chains, lubricating molds, conveyor belts, mechanical arms, and other equipment.
Intelligent Refueling Machine Maintenance
Clean or replace the filter regularly to prevent impurities from entering the lubrication system.
Check the amount of oil in the storage tank regularly to ensure that the amount of oil is sufficient.
Check pumping systems and dispensers regularly to ensure they are working properly.
The automatic refueling machine lubricates the bearings in the bearing chamber on the hand mold seat. Because the hand mold seat has been running in the oven for a long time, the lubricating oil in the bearing is particularly easy to volatilize, resulting in the phenomenon of “dead hand”, so the bearing on the hand mold seat needs to be lubricated frequently.
